Secure reminder Road Roller Operating Requirements

1. The roller must not engage with vibration when it is running at high speed.

2. When stopping, stop the vibration first, then put the reversing mechanism in the middle position, put the transmission in neutral, and finally pull up the hand brake lever, and the internal combustion engine will turn off after idling for a few minutes.

3. Fast gear cannot be used when going up or downhill. In sharp turns, including articulated vibratory rollers when rolling in small turns, it is strictly forbidden to use fast gears.

4. Fast gear cannot be used when going up or downhill. In sharp turns, including articulated vibratory rollers when rolling in small turns, it is strictly forbidden to use fast gears.

5. When rolling, the vibration frequency should be consistent. For the vibratory roller that can adjust your vibration frequency, you should adjust the vibration frequency before working. Do not adjust the vibration frequency without starting vibration.

6. When rolling a soft roadbed, first roll it 1 to 2 times without vibration, and then vibrate it.

7.It is strictly forbidden for the roller to vibrate on a solid ground.

8.During operation, the roller should start before it starts to shake, and the internal combustion engine should be set to medium speed first, and then adjusted to high speed.

9.The engine should be stopped first when shifting and reversing, and the speed of the internal combustion engine should be reduced when shifting.

10.Other operating requirements should meet the requirements of static pressure rollers.